Shopping cart

close
  • No products in the cart.

Return To Shop

DIY - Self Installation Options

These basic tips will get you perfect measurements for window treatments!

 

 

How to Measure Inside Mount Blinds in 3 simple steps

 

1.Using a Metal Tape measure, take all your measurements in millimeters (mm) from one side of the inner wall tot he other side to side

2. Measure from top of the window recess for width and drop

3. Do not make any deductions of the measurement, we will take care of this in the manufacture process

On all blinds when we manufacture them we shall make a small deduction of 2mm from the width, and up to 10mm from the drop to clear the side and the bottom of the window recess allowing correct operation of the blind without interference.

 

How to Measure Outside Mount Blinds

1. Using a Metal Tape measure, take all your measurements in millimeters (mm) from one side of the inner wall tot he other side to side

2.  Measure from top of the window recess for width and drop

3.  Do not make any deductions of the measurement, we will take care of this in the manufacture process

On all blinds when we manufacture them we shall make a small deduction of 2mm from the width, and up to 10mm from the drop to clear the side and the bottom of the window recess allowing correct operation of the blind without interference.

Helpful Hints Before You Begin

For the most accurate measurements, only use a steel tape measure.
Your window measurements should have accounted for either an inside mount or an outside mount. An inside mount is installed inside the window recess and provides a clean, finished look. An outside mount rests above the window and covers the entire frame.

Double check all packaging and make sure you received the correct number of screws, mounts, and hardware with your order before you begin installing.

How to Install Inside Mount Zebra Blinds

 

Please find below the installation process for inside mount blinds. These general steps provide an overview for installing inside mount blinds

 

SLIDING DOORS BLIND FITTING INSTALLATION

 

 

 

Step 1: Mark the position of your brackets and drill holes for anchor screws

 

 

Step 2 : Secure the bracket with the screws and turn the L brackets out until they snap into place

 

 

Step 3 : Hold up the blinds and Install your blinds by sliding the head rail into the brackets and snap the head rail into the brackets

 

 

Step 4 : Test your blinds by lowering, raising, and rotating them to ensure all parts are functional.

 

RECESS WINDOW BLINDS FITTING INSTALLATION

 

 

Step 1 : Mark the position for the bracket fixings

 

 

Step 2: Drill the holes for the mounting bracket

 

 

Step 3: Screw the bracket into place

 

 

Step 4: Hold up the blinds and Install your blinds by sliding the head rail into the brackets and snap the head rail into the brackets

 

 

Step 5: Test your blinds by lowering, raising, and rotating them to ensure all parts are functional.

If you are handy why not try and install your new Hanbo Blinds yourself. Below you will find instructions to install our full range of Zebra and Roller Blinds available through Hanbo Blinds.

Not sure you can install yourself?

Book Hanbo to install today.





Call Now Button